MADE TO IMPRESS

Thanks to our experience in the workshop we can offer multiple solutions to make your 3D printed parts look amazing.

 
 
 
smooth-3d-print.jpg

SMOOTHING

This is the best option if you are looking for that mirror like finish keeping costs to a minimum.
Although it's a fairly common finishing process for 3d printed parts we suggest using it exclusively on small parts. 
We recommend this process for show models and parts where tight tolerances are not critical.
P.S: For best results select fine detail print during your instant quote process.
 

 
 
 
sandblast-3d-print.jpg

HAND SANDING/BEAD BLASTING

Sand paper, sand paper and a bit more sand paper.
This is the most time consuming of the finishing processes but also the one that gives the best results.
The models are thoroughly sanded to 600 grit then sand blasted to achieve a uniform and even surface.
Perfect for show models, end user parts and prototypes.



 

 
 
 
basecoat-3d-print.jpg

HAND SANDING/PRIMING

This is the ultimate step in post processing, the parts are sanded then a coat of primer is applied to give the part a smooth, professional uniform look.
At this point a topcoat of the chosen color can be applied to give the part that "just out of the factory" look.
We recommend this process mainly for showcase models and prototypes.